As a garage door technician with over 2 years of experience, I’ve seen firsthand the importance of garage door springs.

These unassuming components are essential for the smooth operation of garage doors, and they can be dangerous if not properly maintained.

In this article, I’ll discuss the basics of garage door spring inside tubes, including their location, operation, and safety precautions. I’ll also provide some tips on how to replace a broken spring if you’re feeling handy.

What are Garage Door Springs Inside Tubes?

Garage door springs inside tubes are a type of torsion spring that is housed within a metal tube. This design helps to protect the spring from the elements and makes it easier to replace if it breaks.

Torsion springs work by storing energy when they are wound up. When the spring is released, this energy is transferred to the garage door, causing it to move.

The amount of force that a torsion spring can generate is determined by its size and the amount of tension that is applied to it.

Where are Garage Door Springs Located?

Garage door springs inside tubes are typically located at the top of the garage door, on either side of the door opening. They are connected to the door through cables, which allow the spring to transfer its energy to the door.

How Do Garage Door Springs Inside Tubes Work?

When you open the garage door, the cables begin to unwind, releasing the tension on the spring. As the spring unwinds, it transfers its energy to the door, causing it to rise.

When you close the garage door, the cables wind up, compressing the spring and causing the door to lower.

Safety Precautions for Working with Garage Door Springs Inside Tubes

Working with garage door springs inside tubes can be dangerous. The springs are under a lot of tension, and if they are not handled properly, they can break and cause serious injury.

Here are some safety precautions to follow when working with garage door springs inside tubes:

• Always wear safety glasses.
• Never work alone.
• Use a spring winder to safely remove and install the springs.
• Do not attempt to adjust the tension of a spring that is already under load.
• If a spring breaks, contact a qualified garage door technician to replace it.

What to Do If a Garage Door Spring Breaks

If a garage door spring breaks, it is important to take action immediately. A broken spring can be dangerous, and it can also prevent the garage door from opening or closing properly.

Here are the steps to follow if a garage door spring breaks:

1. Disconnect power to the garage door opener.
2. Carefully detach the cables from the old spring.
3. Use a spring winder to remove the old spring from its housing tube.
4. Install the new spring into the tube, making sure that it is properly seated and secured.
5. Reattach the cables to the new spring.
6. Restore power to the garage door opener.

Read Alos: How to Tell If Your Wayne Dalton Torquemaster Spring Is Broken

Conclusion

Garage door springs inside tubes are an important part of any garage door system. By understanding how they work and following safety precautions, you can help to ensure the safety and longevity of your garage door.

If you are not comfortable working with garage door springs inside tubes, it is best to contact a qualified garage door technician. These professionals have the experience and tools necessary to safely and efficiently replace a broken spring.