Is your garage door making unpleasant screeching noises every time you open or close it?

The good news is that you can easily address this issue and restore peace and quiet to your garage.

In this article, we will guide you step by step on how to maintain and eliminate those awful noises from your garage door. So let’s get started!

Identifying the Noise Source

Before we dive into the lubrication process, it’s important to identify the source of the noise. In most cases, the noise originates from the hinges on each panel of the garage door.

When the door operates, the two halves of each hinge rub against each other, creating a screeching sound. You may even notice scuffing where metal contact has occurred.

Lubricating the Hinges

To address the noise issue, we need to lubricate the hinges properly. Apply a high-quality lubricant that penetrates well and thickens up, such as the Worth HHS 2000.

Ensure you get the lubricant between each half of the hinge where they join and pivot. This will significantly reduce friction and eliminate the screeching sound.

Read Also: Best Garage Door Lubricant

Lubricating the Roller Pins

The roller pins play a crucial role in the smooth operation of the garage door. If they are not lubricated, the door may stick and fail to self-align.

Apply a good penetrating lubricant inside the barrel of the hinge and ensure the pins move freely. Pay attention to the bottom roller pin, which may be set up differently and also requires lubrication.

Lubricating the Bearing Plates

The bearing plates bear the entire weight of the garage door. It is essential to keep them well lubricated to ensure smooth and quiet operation.

Apply a generous amount of lubricant to these bearings, as they are often neglected. Make sure to lubricate both sides of the door by applying lubricant to the bearing plates attached to the cable drums.

Maintaining the Torsion Spring

The main torsion spring powers the garage door and can be a common source of noise if not properly maintained. Inspect the condition of the spring and apply an oil-based lubricant if it appears dry.

Avoid greasing the spring and use only lubricants specifically designed for garage door maintenance. A well-lubricated torsion spring will contribute to a quieter and smoother door operation.

Lubricating Other Moving Parts

While addressing the main noise sources, it’s also beneficial to lubricate other moving parts of the garage door.

Although not essential, applying lubricant to components like the nylon bush and any other moving parts can further enhance the overall performance and reduce noise.

How can I make my garage door quieter?

There are a few things you can do to make your garage door quieter:

• Lubricate the rollers and tracks. This will help to reduce friction and noise.
• Tighten any loose screws or bolts. This will help to prevent the door from rattling.
• Replace worn or damaged parts. If the rollers or tracks are worn or damaged, they can make noise.
• Install a garage door silencer. This is a device that attaches to the door and helps to absorb noise.
• Upgrade to a quieter garage door opener. Some garage door openers are quieter than others.

Conclusion

By following the steps outlined in this guide, you can effectively quiet a noisy garage door.

Regular maintenance and proper lubrication are key to eliminating unpleasant noises and ensuring smooth operation.

Remember to use high-quality lubricants and apply them to the appropriate points of contact.

A well-maintained garage door will provide you with peace and quiet, making your garage a more enjoyable space.

FAQs

How often should I lubricate my garage door?

It is recommended to lubricate your garage door at least once every six months to keep it running smoothly and reduce noise.

Can I use any lubricant for my garage door?

It’s best to use lubricants specifically designed for garage door maintenance. They provide better penetration and longevity compared to general-purpose lubricants.